Recent Topics
CDI Modem (PA 100)
I have a quick question. Is there a way to disable the WIFI feature in the CDI Modem (PA 100), as I am not planning to use the WIFI nor the Antennas. I appreciate it.
Welcome to the CDI Support Center
The CDI Support Center has been designed to provide the highest level support to our valuable customers. Within the Support Center, you will be able to submit help tickets for for any of our products or services. In addition to submitting help tickets, you will find a robust Knowledge Base containing information on all our hardware & software products. The Knowledge Base library will hold all our Technical Manuals, Install Sheets, Cable Information and Software Support Instructions and videos. CDI
SNMP polling and MIB
Hello, We're taking over 60 or so of your devices. Which will require to be polled by via SNMPv3 Can you confirm it's doable? I couldn't find the info in your KB. Where can we download the MIB? Kind regards, Maxime
Non-CDI modems
What would one expect to see if dialing into a CDI modem from a non-CDI modem (USRobotics for example) not using the OBM platform? Thank you.
Break Sequence
When connecting to a device via the serial port on the PA244 is there a way to send a break sequance (ctrl + C)? This doesn't seem to be gettign forwarded, Thanks
PA228
Hello, I'm looking for Manuals/Admin Guide for PA228.
PA-222
Unable to browse to http. No login screen in port 80
CDI PA 111 freezing up every few days.
The modem work fine but freezes up after a few days. Work well after program reload or power cycle. Any ideas what could be the issue?
is not defined in system error
When trying to connect to a remote modem I get the following error 3 times. PA11-xxx-xxxxxx is not defined in system, then it disconnects, how can I fix this?
need the following items in india Mumbai
Part No. Description Qty PA222-s1 Port Authority 222 Stand Alone Device. Head end Clint Encryptor 2 PA222-S1 Port Authority 222 Stand Alone Device. One Network port, 2 Serial Host Ports, 2 Power Control Ports. Include Global PSU, UK Schuko or US Power Cord, 2xDB9F-RJ45 DCE Blue Adaptor, 2xRJ45-RJ45 silver satin cable and 1xRJ11-RJ11 cable 1 EDL-M Enhanced Device License Manages one PA100 or PA200 device 3 S1-SPM-10-1 Switched Power Module 10amp, 100-120v 2 OBM SQL Out of Band Manager is a central
Flash remote device
What are the procedures to update the version of firmware on remote devices?
Capture
How do I capture the output from my devices that are connected to the PA? I have a switch that can't I can't get into with SSH, but I can get in through the PA and the console port. I need to get the output of the show tech command and I would like to capture it with the PA. Does anyone have an idea on how to capture information. I have used the capture destination button and the capture mode but I have saved anything using that method.
OBM Software
Is there a downloadable version of the OBM software?
ASA 5508-x/5516-x compatibility
I have a customer that, for some reason, needs to be convinced that CDI OOBs can be used with the RJ45 console ports on their ASA 5508-X and 5516-X devices. Just so I can put this issue to bed...is there any reason this configuration would not be supported? Thanks
Master slave configuration -PA288
Hi there is it possible to configure a master/slave setup using just a script file ? thanks Paul